MLton 20070826 ObjectOrientedProgramming
Home  Index  
Standard ML does not have explicit support for object-oriented programming. Here are some papers that show how to express certain object-oriented concepts in SML.

The question of OO programming in SML comes up every now and then. The following discusses a simple object-oriented (OO) programming technique in Standard ML. The reader is assumed to be able to read Java and SML code.

Motivation

SML doesn't provide subtyping, but it does provide parametric polymorphism, which can be used to encode some forms of subtyping. Most articles on OO programming in SML concentrate on such encoding techniques. While those techniques are interesting --- and it is recommended to read such articles --- and sometimes useful, it seems that basically all OO gurus agree that (deep) subtyping (or inheritance) hierarchies aren't as practical as they were thought to be in the early OO days. "Good", flexible, "OO" designs tend to have a flat structure

         Interface
             ^
             |
- - -+-------+-------+- - -
     |       |       |
   ImplA   ImplB   ImplC

and deep inheritance hierarchies

ClassA
  ^
  |
ClassB
  ^
  |
ClassC
  ^
  |

tend to be signs of design mistakes. There are good underlying reasons for this, but a thorough discussion is not in the scope of this article. However, the point is that perhaps the encoding of subtyping is not as important as one might believe. In the following we ignore subtyping and rather concentrate on a very simple and basic dynamic dispatch technique.

Dynamic Dispatch Using a Recursive Record of Functions

Quite simply, the basic idea is to implement a "virtual function table" using a record that is wrapped inside a (possibly recursive) datatype. Let's first take a look at a simple concrete example.

Consider the following Java interface:

public interface Counter {
  public void inc();
  public int get();
}

We can translate the Counter interface to SML as follows:

datatype counter = Counter of {inc : unit -> unit, get : unit -> int}

Each value of type counter can be thought of as an object that responds to two messages inc and get. To actually send messages to a counter, it is useful to define auxiliary functions

local
   fun mk m (Counter t) = m t ()
in
   val cGet = mk#get
   val cInc = mk#inc
end

that basically extract the "function table" t from a counter object and then select the specified method m from the table.

Let's then implement a simple function that increments a counter until a given maximum is reached:

fun incUpto counter max = while cGet counter < max do cInc counter

You can easily verify that the above code compiles even without any concrete implementation of a counter, thus it is clear that it doesn't depend on a particular counter implementation.

Let's then implement a couple of counters. First consider the following Java class implementing the Counter interface given earlier.

public class BasicCounter implements Counter {
  private int cnt;
  public BasicCounter(int initialCnt) { this.cnt = initialCnt; }
  public void inc() { this.cnt += 1; }
  public int get() { return this.cnt; }
}

We can translate the above to SML as follows:

fun newBasicCounter initialCnt = let
       val cnt = ref initialCnt
    in
       Counter {inc = fn () => cnt := !cnt + 1,
                get = fn () => !cnt}
    end

The SML function newBasicCounter can be described as a constructor function for counter objects of the BasicCounter "class". We can also have other counter implementations. Here is the constructor for a counter decorator that logs messages:

fun newLoggedCounter counter =
    Counter {inc = fn () => (print "inc\n" ; cInc counter),
             get = fn () => (print "get\n" ; cGet counter)}

The incUpto function works just as well with objects of either class:

val aCounter = newBasicCounter 0
val () = incUpto aCounter 5
val () = print (Int.toString (cGet aCounter) ^"\n")

val aCounter = newLoggedCounter (newBasicCounter 0)
val () = incUpto aCounter 5
val () = print (Int.toString (cGet aCounter) ^"\n")

In general, a dynamic dispatch interface is represented as a record type wrapped inside a datatype. Each field of the record corresponds to a public method or field of the object:

datatype interface =
   Interface of {method : t1 -> t2,
                 immutableField : t,
                 mutableField : t ref}

The reason for wrapping the record inside a datatype is that records, in SML, can not be recursive. However, SML datatypes can be recursive. A record wrapped in a datatype can contain fields that contain the datatype. For example, an interface such as Cloneable

datatype cloneable = Cloneable of {clone : unit -> cloneable}

can be represented using recursive datatypes.

Like in OO languages, interfaces are abstract and can not be instantiated to produce objects. To be able to instantiate objects, the constructors of a concrete class are needed. In SML, we can implement constructors as simple functions from arbitrary arguments to values of the interface type. Such a constructor function can encapsulate arbitrary private state and functions using lexical closure. It is also easy to share implementations of methods between two or more constructors.

While the Counter example is rather trivial, it should not be difficult to see that this technique quite simply doesn't require a huge amount of extra verbiage and is more than usable in practice.

SML Modules and Dynamic Dispatch

One might wonder about how SML modules and the dynamic dispatch technique work together. Let's investigate! Let's use a simple dispenser framework as a concrete example. (Note that this isn't intended to be an introduction to the SML module system.)

Programming with SML Modules

Using SML signatures we can specify abstract data types (ADTs) such as dispensers. Here is a signature for an "abstract" functional (as opposed to imperative) dispenser:

signature ABSTRACT_DISPENSER = sig
   type 'a t
   val isEmpty : 'a t -> bool
   val push : 'a * 'a t -> 'a t
   val pop : 'a t -> ('a * 'a t) option
end

The term "abstract" in the name of the signature refers to the fact that the signature gives no way to instantiate a dispenser. It has nothing to do with the concept of abstract data types.

Using SML functors we can write "generic" algorithms that manipulate dispensers of an unknown type. Here are a couple of very simple algorithms:

functor DispenserAlgs (D : ABSTRACT_DISPENSER) = struct
   open D

   fun pushAll (xs, d) = foldl push d xs

   fun popAll d = let
          fun lp (xs, NONE) = rev xs
            | lp (xs, SOME (x, d)) = lp (x::xs, pop d)
       in
          lp ([], pop d)
       end

   fun cp (from, to) = pushAll (popAll from, to)
end

As one can easily verify, the above compiles even without any concrete dispenser structure. Functors essentially provide a form a static dispatch that one can use to break compile-time dependencies.

We can also give a signature for a concrete dispenser

signature DISPENSER = sig
   include ABSTRACT_DISPENSER
   val empty : 'a t
end

and write any number of concrete structures implementing the signature. For example, we could implement stacks

structure Stack :> DISPENSER = struct
   type 'a t = 'a list
   val empty = []
   val isEmpty = null
   val push = op ::
   val pop = List.getItem
end

and queues

structure Queue :> DISPENSER = struct
   datatype 'a t = T of 'a list * 'a list
   val empty = T ([], [])
   val isEmpty = fn T ([], _) => true | _ => false
   val normalize = fn ([], ys) => (rev ys, []) | q => q
   fun push (y, T (xs, ys)) = T (normalize (xs, y::ys))
   val pop = fn (T (x::xs, ys)) => SOME (x, T (normalize (xs, ys))) | _ => NONE
end

One can now write code that uses either the Stack or the Queue dispenser. One can also instantiate the previously defined functor to create functions for manipulating dispensers of a type:

structure S = DispenserAlgs (Stack)
val [4,3,2,1] = S.popAll (S.pushAll ([1,2,3,4], Stack.empty))

structure Q = DispenserAlgs (Queue)
val [1,2,3,4] = Q.popAll (Q.pushAll ([1,2,3,4], Queue.empty))

There is no dynamic dispatch involved at the module level in SML. An attempt to do dynamic dispatch

val q = Q.push (1, Stack.empty)

will give a type error.

Combining SML Modules and Dynamic Dispatch

Let's then combine SML modules and the dynamic dispatch technique introduced in this article. First we define an interface for dispensers:

structure Dispenser = struct
   datatype 'a t =
      I of {isEmpty : unit -> bool,
            push : 'a -> 'a t,
            pop : unit -> ('a * 'a t) option}

   fun O m (I t) = m t

   fun isEmpty t = O#isEmpty t ()
   fun push (v, t) = O#push t v
   fun pop t = O#pop t ()
end

The Dispenser module, which we can think of as an interface for dispensers, implements the ABSTRACT_DISPENSER signature using the dynamic dispatch technique, but we leave the signature ascription until later.

Then we define a DispenserClass functor that makes a "class" out of a given dispenser module:

functor DispenserClass (D : DISPENSER) : DISPENSER = struct
   open Dispenser

   fun make d =
       I {isEmpty = fn () => D.isEmpty d,
          push = fn x => make (D.push (x, d)),
          pop = fn () =>
                   case D.pop d of
                      NONE => NONE
                    | SOME (x, d) => SOME (x, make d)}

   val empty =
       I {isEmpty = fn () => true,
          push = fn x => make (D.push (x, D.empty)),
          pop = fn () => NONE}
end

Finally we seal the Dispenser module:

structure Dispenser : ABSTRACT_DISPENSER = Dispenser

This isn't necessary for type safety, because the unsealed Dispenser module does not allow one to break encapsulation, but makes sure that only the DispenserClass functor can create dispenser classes (because the constructor Dispenser.I is no longer accessible).

Using the DispenserClass functor we can turn any concrete dispenser module into a dispenser class:

structure StackClass = DispenserClass (Stack)
structure QueueClass = DispenserClass (Queue)

Each dispenser class implements the same dynamic dispatch interface and the ABSTRACT_DISPENSER -signature.

Because the dynamic dispatch Dispenser module implements the ABSTRACT_DISPENSER -signature, we can use it to instantiate the DispenserAlgs -functor:

structure D = DispenserAlgs (Dispenser)

The resulting D module, like the Dispenser module, works with any dispenser class and uses dynamic dispatch:

val [4, 3, 2, 1] = D.popAll (D.pushAll ([1, 2, 3, 4], StackClass.empty))
val [1, 2, 3, 4] = D.popAll (D.pushAll ([1, 2, 3, 4], QueueClass.empty))


Last edited on 2007-02-15 17:22:16 by VesaKarvonen.